I²C - Slave Report Configuration

Report Type: IN / OUT
Report Size: 2 Bytes
Acknowledged By: Command Acknowledgement

Report ID	Flags
00001010	000000 T t

Report ID

HID Report ID. Always 0x0a.

Flags

Bits	Direction	Meaning
t	IN / OUT	Whether transaction notifications are enabled; 1 if reports will be sent to the Host after each Slave transaction, 0 if not.
T	IN / OUT	The value of the Transaction Notification flag stored for the current configuration, ie. the default value of the t flag at power-up.

Notes

The default value of the Transaction Notification flag in the factory-supplied firmware is 0.